Products

 
     
 

 (Updated: 30 Aug 2008)

  
 

Home | Aquarium Page | Site Map

  

 

Any man who afflicts the human race with ideas must be prepared to see them misunderstood. 

--H. L. Mencken (1880 - 1956)*

 

 

 

 

Purigen™ is a premium synthetic adsorbent that is unlike any other filtration product. It is not a mixture of ion exchangers or adsorbents, but a unique macro-porous synthetic polymer that removes soluble and insoluble impurities from water at a rate and capacity that exceeds all others by over 500%. Purigen™ controls ammonia, nitrites and nitrates by removing nitrogenous organic waste that would otherwise release these harmful compounds. Purigen’s™ impact on trace elements is minimal. It significantly raises redox. It polishes water to unparalleled clarity. Purigen™ darkens progressively as it exhausts, and is easily renewed by treating with bleach. Purigen™ is designed for both marine and freshwater use. This product is sold by volume. Cited weight is minimal weight.
 

DIRECTIONS: Rinse before use. Use in a fine mesh filter bag. Each 1 L treats up to 4,000 L (1,000 gallons*) for up to six months. Exhaustion is indicated by a pronounced discoloration of the beads to dark brown or black.

 

Regeneration: Soak in a 1:1 bleach:water solution for 24 hours in a non-metalic container in a well ventilated area and away from children. Rinse well, then soak for 8 hours with a solution containing 2 tablespoons of ChlorGuard™, Prime™, or equivalent dechlorinator per cup of water. Rinse well. For freshwater use, soak for 4 hours with a solution containing 1 tablespoon of buffer per cup of water (Discus Buffer™, Neutral Regulator™, or Acid Buffer™). Original color and full activity should now be restored and Purigen™ is ready for reuse. Caution: some slime coat products may permanently foul Purigen™ and render regeneration difficult. Do not reuse if odor of chlorine is detectable. In case of doubt, soak beads in small quantity of water and test for residual chlorine with a chlorine test kit.   

 
         
Poly Filter  

The POLY-FILTER is for filtering and purifying both fresh and salt water aquariums. It is a formulation of a special patented material bonded to a synthetic matrix. By means of a unique proprietary process, the POLY-FILTER is made impervious to salt and is also organic loving to certain materials. It can absorb and adsorb contaminants and other toxic materials found in nature or added to fresh and salt water with or without fish and invertebrates. Medication added to fresh and salt water aquariums for treatment of diseased fish will automatically be removed by the POLY-FILTER after serving their intended purpose before the medication can produce a toxic effect on the fish.


The POLY-FILTER is non-toxic and harmless to biological filtration because it allows a sufficient amount of ammonia to reach the biological filter in order to sustain the bacteria culture. The POLY-FILTER provides a supplemental means for removal of ammonia when the biological filter is unable to break down the excess ammonia and its concentration increases rapidly. Then the POLY-FILTER adsorbs the excess ammonia while the biological filter readjusts to higher ammonia input levels.
BECAUSE OF THIS UNIQUE FILTERING CHARACTERISTIC, THE POLY-FILTER ELIMINATES THE NEED AND EXPENSE OF CARBON OR ION EXCHANGE RESINS AND PROTEIN SKIMMERS.